- Brief Introduction
The Miniature Cycloidal Gear Reducers is a novel transmission device that uses the planetary transmission principle and uses cycloidal pin gear meshing. The transmission of the cycloidal pinwheel reducer can be divided into three parts: the input part, the deceleration part and the output part.
- Product Features
Miniature Cycloidal Gear Reducers has the characteristics of large transmission ratio, high efficiency, small volume, light weight, durable, reliable and long life, and can be installed and used at any Angle and direction.
- Scope of using
Miniature Cycloidal Gear Reducers is suitable for food machinery, printing machinery, textile machinery, rubber and plastic machinery, pharmaceutical machinery, ceramic machinery and various industrial production line deceleration device and transmission device.
- Product Specifications
The Miniature Cycloidal Gear Reducers allows it to be used in continuous operation, while allowing both forward and reverse directions. 2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 6-pole motor with 960 rpm.
- The working position of the horizontally mounted cycloid reducer is horizontal. The maximum horizontal tilt angle during installation is typically less than 15°. Other measures should be taken to ensure adequate lubrication and prevent oil leakage when it exceeds 15°. 4. The output shaft of the Miniature Cycloidal Gear Reducers cannot be subjected to large axial and radial forces. Other measures must be taken when there are large axial and radial forces.
- Direction for Using
Miniature Cycloidal Gear Reducers unique smooth structure can replace ordinary cylindrical gear reducer and worm gear reducer in many cases. Therefore, planetary cycloidal reducer is widely used in various industries and fields, and is widely welcomed by users.
Reasonable design, convenient maintenance, easy to disassemble and install, minimum number of parts and simple lubrication, so that the cycloid reducer is trusted by users.
- Usage Support
The horizontal Miniature Cycloidal Gear Reducers is lubricated under normal conditions by oil pool. The height of the oil surface can be kept in the middle of the oil window. It can be used for circulating lubrication when the working conditions are bad and the ambient temperature is high.
The Miniature Cycloidal Gear Reducers is generally lubricated with 40# or 50# mechanical oil at normal temperature. In order to improve the performance of the reducer and extend the service life of the cycloid reducer, it is recommended to use 70# or 90# extreme pressure gear oil. Lubricants should also be reconsidered when working at high or low temperatures.
Christine Zhu ( Sales Department; Miss. )
NER GROUP CO.,LIMITED
Tel:+86-535-6330966
Mobile:+86-13688909643
http://www.bonwaygroup.com/
https://twitter.com/gearboxmotor
https://www.facebook.com/sogears1993
Viber/Line/Whatsapp/Wechat: 008613688909643
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.;
Skype ID: This email address is being protected from spambots. You need JavaScript enabled to view it.
Factory Add: No.5 Wanshoushan Road, Yantai, Shandong Province, China (264006)